Latest News Of YIM Space

When engineers build a self-powered IoT device, 90% of the effort goes into photovoltaic conversion efficiency—30% versus 35%, endlessly debated. But anyone who has actually deployed field devices knows the truth: systems rarely die from insufficient generation. They die on the storage side. A week

The cost-reduction paths for space GaAs solar cells are narrowing simultaneously from two independent directions. 1. Push “Thinness” to the Limit and Recover What Is “Expensive” Flexible gallium arsenide (GaAs) solar cells less than 0.1 mm thick are being efficiently produced on production lines, we

It weighs less than a grain of rice and carries no battery. Yet this 0.066 g tag—attached to a monarch’s thorax with eyelash glue—uses a rice-sized solar cell to power a passive Bluetooth transmitter that a phone can receive nearly 100 m away. How?The energy budgetKnown: 0.066 g, passive Bluetooth,

What Spectrolab TASC Scrap Solar Cells Exist — and What Small Satellite Teams Should KnowIf you have spent any time sourcing components for a small satellite project, you have likely encountered mention of Spectrolab's Triangular Advanced Solar Cells — better known as TASC cells. You may also have n

GaAs Vs Perovskite Vs HJT: Which Solar Cell Technology for Your Satellite Mission? Three Technologies, Three Value Propositions,Space solar cell technology comparison.

TrailNAV, an open-source solar-powered offline navigation device based on ESP32-C6 MCU and 2.7" e-paper display, was released in June 2026. It integrates NEO-M8N GPS and QMC5883L magnetometer for destination guidance and digital compass — fully off-grid, no cellular required. Fully open-source on GitHub, demonstrating embedded systems' potential for ultra-low-power outdoor navigation.

NB-IoT and LoRaWAN have become dominant connectivity technologies for solar GPS trackers, offering ultra-low power consumption and strong signal penetration. Solar panels are being further miniaturized for animal wearable trackers. 

GaAs possesses many outstanding properties and has a wide range of applications, which can be broadly classified into four major areas: RF (Radio Frequency), PHOTONICS, LED (Light Emitting Diode), and PV (Photovoltaic).

In an era of deep integration between the Internet of Things (IoT) and new energy technologies, solar-powered GPS suppliers are emerging as key drivers in advancing green positioning technology. By combining solar power generation with GPS positioning, these manufacturers offer sustainable, maintenance-free solutions for outdoor equipment, logistics tracking, environmental monitoring, and more.

To address the energy loss caused by insufficient sun-tracking accuracy in PV systems, researchers have developed a hybrid algorithm dual-axis solar tracking system (DASTS) that integrates GPS positioning and light-dependent resistors (LDRs). Through innovative LDR design and algorithm optimization, the tracking error has been reduced to 1.8°, and experimental results show a 38.2% increase in power generation compared to fixed systems.